RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Resolved! Can I cancel the session timeout

hi everyone • Session Timeout: Sets a time limit (in minutes) after which users will be disconnected from the hotspot service and required to log in again. Can I cancel the session timeout？ If I reach the time limit for wireless acces...

smartzone 不断重新认证

咨询一个问题，smartzone开放3个无线信号，信号1开启身份认证采用ldap服务，另外2个采用密码加密认证，链接信号1身份认证通过，切换到信号2或3，再切回信号1时需要重新身份认证。身份认证时效宽限期未到。

Resolved! vSZ 6.1.1.0.959 - Older models (R500,T301s) do not broadcast WLAN.. (not assigned) - solved

Hi to all... having some older APs migrated to my new vSZ i noticed that any access point running on 5.2.2.0.2064 fw (in the corresponding zone) do not have any WLAN assigned on them and they do not broadcast at all... My licenses are ok, all access ...

SmartZon: User Traffic Profile vs. Firewall Profile

Can someone explain the difference between the User Traffic Profile & Firewall Profile and why there are overlapping ACLs and Rate Limiting? I have been troubleshooting an issue for my WLAN where a user-role-mapping was causing clients to be dropped ...

Bonjour Gateway with Client Isolation

Hey Gang,I'm working on a new LAN design scheme for our offices and taking my time to fully understand the Bonjour Gateway feature by reading through the "Ruckus Bonjour Gateway “How To” Guide" from 2018. We're running a pair of SZ124s and planning ...

CommScope RUCKUS Community Forums

Forum Posts

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

Resolved! Can I cancel the session timeout

smartzone 不断重新认证

Resolved! vSZ 6.1.1.0.959 - Older models (R500,T301s) do not broadcast WLAN.. (not assigned) - solved

SmartZon: User Traffic Profile vs. Firewall Profile

Bonjour Gateway with Client Isolation

Welcome to RUCKUS Community!

Top Contributor Contest

Related Self-Help

Migrating Access Points from SZ100 to vSZ

R500 not joining Virtual Smart Zone

Ruckus ZD

Port Group for SZ-144 Controller

Change the controller name while it is part of Clu...

Change Port Default SSH Tunnel Port on Data and co...

Code 236 Event Client no show on my SZ300 V6

[sz(or vsz)] What settings should I change? Will t...

Venue Code

Please let me know the appropriate firmware.