Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
Need helpHello,I am doing a lab on the vSZ-D. vSZ and vSZ-D were installed on two different servers that are in the same network and connected by a switch.My problem I can not integrate the vSZ-D although it is visible in vSZ because the approval ...
Feb 8 08:44:03 RuckusAP daemon.err wsgclient[464]: crSocketInit:243 crSocketConn failed ret = 124Feb 8 08:44:03 RuckusAP daemon.err wsgclient[464]: cmrInit:138 Call 'crDefSocketInit()' failed, ip:10.1.115.16 port:443, ret:124/CR initial socket fail...
How does one configure an access point to send an IPv6 router solicitation when its WAN port is connected to a switch?I'm testing an R500 access point with the latest version of vSZ, and the access point waits (up to a couple of minutes) for a router...
Hi All,We are having SCG200 Controller running version 3.5.1.0.862. Our neighbors told us that they have detected numerous deauth packets from our SSID, which is affecting their clients. As a result, we want to disable the Protection feature as we us...
Hi, I would like to know if there's autonomous WLAN feature in SmartZone just like in ZoneDirector. How do I enable this feature if it's available?Thanks and regards,iftitah
