CommScope RUCKUS Community Forums

mamadou_oury_di · 03-25-2020

HelloI am on a project in which I have to depoiloyer vSZ 5.1.0.0.496 and AP R510 for one our customers. Diagrams below.But I have a problem because the clients cannot get an IP address from the DHCP server.Any suggestion will be welcome.Thank you in ...

mamadou_oury_di · 02-12-2018

Need helpHello,I am doing a lab on the vSZ-D. vSZ and vSZ-D were installed on two different servers that are in the same network and connected by a switch.My problem I can not integrate the vSZ-D although it is visible in vSZ because the approval ...

mamadou_oury_di · 06-18-2021

OK. Something else can you check at the license level if the number of APs is not reached?

mamadou_oury_di · 06-18-2021

Hello, Can you see if this can solve the problem.https://support.ruckuswireless.com/articles/000003945

mamadou_oury_di · 03-25-2020

Hi Victor,Thank you for the message but I can't really understand what you mean.

mamadou_oury_di · 03-25-2020

OKAY. despite the fact that the information does not pass by Internet by going from the DC to the sites

mamadou_oury_di · 03-25-2020

Hi,If I configure vlans at the switch site, the machines obtain an IP address from the DHCP server.The problem is that our client had a ruckus ZD 1200 solution with the same configuration and the machines obtain an IP address without having to config...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Clients not get IP address from DHCP server

Integration problem vSZ and vSZ-D

Re: r750 heartbeat getting lost and disconnecting continously

Re: r750 heartbeat getting lost and disconnecting continously

Re: Clients not get IP address from DHCP server

Re: Clients not get IP address from DHCP server

Re: Clients not get IP address from DHCP server