Information to gather for ICX POE issues

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Basic list of non-intrusive commands.

show commands:
1. show config
2. show running-config
3. show stack
4. show version
5. show chassis
6. show vlan
7. show inline power | inc stack/slot/port)
8. show interface brief
9. show inline power detail
10. show chassis
11. show lldp
12. show lldp neighbors detail ports all (for single port: ports ethernet stack/slot/port)
13. show fdp
14. show fdp neighbors ethernet stack/slot/port
14. show inline power emesg

General information to request:

What Powered Device (PD) types are connecting to the Power Source Equipment (PSE)
i.e. Model number, firmware version, serial number, manufacturer, PoE standard provides up to 15.4 W, PoE+ or PoE plus, provides up to 25.5 W of power?
And/or Power over HDBaseT (PoH), ratified in September 2011, extends PoE’s capabilities to deliver up to 95W?

0 REPLIES 0