Commscope

Hi,Just is case, take a look. switch# show webto see if HTTP or HTTPS is really enabled.Also,There should be a password, it could be local, radius or TACACSExample if it is Localswitch# username webuser password passwordswitch# aaa authentication web...

I would try a ip route to the default gateway, device(config)# ip route 0.0.0.0/0 x.x.x.xThis link can help you out: http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-commandref/GUID-2E5545F8-42DD-476B-A0...

Hi, you may be probably running switching code, you need to run routing code, the routing code may look like this: SPR08061c, "R" for routing.

Hello, I hope you are doing great today, that would be it if you enter that command, also there is more information here in case you need it http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-webguide/GUID-43210924-D6FC-4FAB-B7E3...

Hello, thanks for the question, it would depend on your needs (as previously mentined, SmartZone on newer versions), you can take a look at software release notes...however according with the website the recommended one is 8070dhttps://support.ruckus...