Resolved! R750 AP firmware
We have a network of R720s running firmware 6.1.1.0.1274. At least for testing purposes, will the R750 work on this firmware, or is the 6.1.1.0.1322 required?
RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Forum Posts
Resolved! Move to R760s Has Been Terrible, I Miss My R710s
This summer I moved my school from R710s to R760s and my SZ100 to a vSZ. The move to the vSZ was painful enough since there is no migration process, but it seems that even with the R760s using the same settings that I had on the old SZ100 w/ R710s, t...
AP used for ethernet to PC?
Can I use the 2nd port on one of my r510 APs to hardwire my PC via ethernet cable? The switch/modem is VERY far from my setup, I'd rather not run a huge cable through my whole home. I don't want to plug anything into the AP and potentially screw some...
SmartZone Per-User Shape
Hello We have virtual SmartZone, version is 6.1.1.0.959 and I would like to apply per-user shape and not sure how I can do it. In setting I found one place where it should be:I tried to apply L3 Access Policy but it didn't shape traffic. How I can ap...
Resolved! Unleashed R650 frequent reboot - Fatal error received from wcss software!
Hi All, Anyone with AX-capable access point experiencing frequent heartbeat loss and self-reboots?Checked cable are good, and PoE injectors are from Ruckus as well. From the logs, I was able to find related messages:Fatal error received from wcss sof...
Related Self-Help
