RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Help configuring Ruckus for my home network.

All,Have had multiple issues with Cisco 9130 and Cisco switch. I am now running an ICX 7150-c12p and want to rollout two R650s eventually to cover my 1600 sqft home. It’s not too large but the master bedroom is on one end and is behind the oven hood ...

Ruckus devices not rebooting

I really could use some help in reconnecting my wi-fi devices. I have tried every suggestion mentioned but noting is working. We have been without internet for almost a week. I teach online and this is not the best scenario. The problem began after a...

Issue with adding R500 APs to a Ruckus ZD3050

Hi – We have a ZoneDirector 3050 with software version 9.8.3.0 build 58, and I’m currently attempting to add R500 APs to it, and I’m having trouble. If the R500 APs are factory reset, some will reset to firmware version 110, and some to version 104 a...

Resolved! R710 / R510 5Ghz speed not as fast as I hoped for

Hi,With my previous gear (Mikrotik CAP ACs flashed with OpenWRT), I was able to get 500-550 Mbps on an ideal case on the 5 GHz band (80 MHz) on my Macbook, and 300 Mbps on my phone running iperf3 connected to a wired server on the same switch as the ...

R750 firmware 6.1.1.0.1274 drops 2.4Ghz IoT devices

Upgraded vSZ to 6.1.1.0.959 and 3*R750 + 3 *R850 to firmware 6.1.1.0.1274One specific IoT device based on an ESP32 drops offline from a 2.4Ghz network after 5 minutes due to 'inactivity' even though its constantly transmitting temperature and pressur...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

2

1

1