RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

A way to use 6 MHz channels on Ruckus APs

I would like to use 6MHz wide channels on ZoneDirector, SmartZone 100 and SmartZone 300 and out-door APs on 5GHz and 2.4GHz (R700 and R300). I know I can use some 20 or 40MHz channels on bridges, but available channels are limited and I would need...

Zoneflex 7962 coverage ?

Does anyone know what is the distance of Zoneflex 7962 coverage ?30meter or 60 meter ?Thanks

Zone director stops handing out IP's

We have a Zone Director model 1200 version 9.12 build 336 and 9 AP's. In the last couple of weeks the ZD will just stop handing out IP's to clients. The signal is still strong but it will either take a long time to get and IP or it wont issue one at ...

ATEX compliant WiFi AP- Explosive Atmospheres

Hi, I'm looking for a way to put WiFi into a factory area that requires special consideration for explosive atmospheres. The official spec I have to comply with is ATEX http://www.hse.gov.uk/fireandexplosion/atex.htm#whatatex I have found these enclo...

how to disable the autonomous operation of an access point

I have a new access point, the problem is that the access point does not communicate with the zonedirector even if the uid dir does not blink

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1