Converting standalone R710 to unleashed version at remote site
Hi, as the title says, I have a remote R710 I want to change to unleashed. Is it possible without a factory reset? I'd like to do this remotely if possible without user help?!
Forum Posts
R700 AP won't show admin page after setting a static IP
I have a 3 year old R700 AP that won't show the admin page after setting a static IP.I wanted to use a Norton Core for the firewall but...Once Norton’s people confirmed the Ruckus IP was changed by the Core, I knew I’dnever know what IP the Core assi...
Configuring a point to point bridge with 2 T301N AP's
I currently have an Extreme Networks wireless bridge in place but it continues to drop. My vendor consulted with his site survey guys and they suggested we use the T301N APs to configure the bridge.I purchased the two T301Ns and assigned a static IP ...
ZD1200 doesn't show 40Mhz Channels as options
I want to use 40Mhz on the 5Ghz band, however in the set up on the 20Mhz channels are listed as an option.Is there a way to include the 40Mhz channels?
Settings to maximize performance 2 x R610 running unleashed
I am running 2 R610 with the unleashed firmware. I am looking for the best settings to get the greatest bandwidth through the devices. A plain vanilla install gets about 50 Mbps on 2.4 Ghz and about 160 Mbps on 5 Ghz. This is in a residential sett...
Related Self-Help
