I have a 3 year old R700 AP that won't show the admin page after setting a static IP.I wanted to use a Norton Core for the firewall but...Once Norton’s people confirmed the Ruckus IP was changed by the Core, I knew I’dnever know what IP the Core assi...
I currently have an Extreme Networks wireless bridge in place but it continues to drop. My vendor consulted with his site survey guys and they suggested we use the T301N APs to configure the bridge.I purchased the two T301Ns and assigned a static IP ...
I want to use 40Mhz on the 5Ghz band, however in the set up on the 20Mhz channels are listed as an option.Is there a way to include the 40Mhz channels?
I am running 2 R610 with the unleashed firmware. I am looking for the best settings to get the greatest bandwidth through the devices. A plain vanilla install gets about 50 Mbps on 2.4 Ghz and about 160 Mbps on 5 Ghz. This is in a residential sett...
Hi,Can I use the Ruckus R600 PoE, IEEE 802.3af, 48VDC and 350mA output?http://www.intelbras.com.br/empresarial/poe/injetores/poe-200-at
