By using copper Ethernet cabling to provide DC power, Power over Ethernet (PoE) removes the requirement for distinct power supplies and sockets. It grants increased installation flexibility for Ethernet end devices, although it lacks Ethernet data ca...
For ease of management and monitoring of the ICX switches, they are enabled to communicate with Ruckus's cloud platform : Ruckus 1 or R1, as we call it.Here we have the switch onboarded to the cloud under the venue :We see the same under Wired >> Swi...
QoS: Quality of Service, as the name implies, stands to improve the service of traffic in the network.More specifically: traffic that otherwise would be suppressed due to huge amounts of frames flowing through.This would generally be seen for VoIP tr...
In a network, latency can occur at any moment. However, given that we have a varied end-user pool, the impact of this can vary in scale. Therefore, keeping a close eye on it would prove vital.Given that in a deployment, we see various devices from va...
Network connection Issues can be few of the things that can be a bit tricky to troubleshoot, Main reason being that there is always not one same cause behind the scenes that caused it, scenario to scenario the cause for the trouble can vary. Genera...
Hi Applewaffle,
For Creating a trunk port, where multiple vlans are tagged and there is a untagged vlan.
The ports are untagged to the default vlan thats set on the device by default. Usually this is Vlan 1. When configuring the switch, the port woul...
Hi Jeronimo,
Checking on the mentioned FI-270020, the same has been tended-to on the newer or the current releases. Tracing the same, patch for this concern should be addressed on over an previous release of 9010 code image. Hence on the current rele...
Hi jmora, Do let us know a few details of the issue that you are facing. Are you trying to update the switch to 9010j_cd2 ? If yes, could you let us know the version the device is on ?
Based on that we can suggest the path, if the device is on a old...
Hi SuperXBen,
Based on the error encountered :
>>>>>
Loading: T T T T T T T T T TRetry count exceeded; starting again
>>>>>
Here the concern is that the switch is not getting an response from the server.
Settings on the server application should be ...
Multi-host works best when AP or Hub is connected. Multi-untagged works best when IP phones are connected.
Here single-untagged/single-host [ default ] would be best mode to go on. This may need to be investigated further as its also observed on co...
