CommScope RUCKUS Community Forums

ys · 09-12-2022

What is differences between "Target Path" and "Recommended Firmware"?Which one is best choice to upgrade.For example of ICX7450 (as of 2022-09-12):Target Path: 08090kRecommended Firmware: 08095g

ys · 07-04-2022

We are planning build a new ICX7450 stack with 4 members, and will have two 10G UPLINKs to our core network.These 10G connection will be terminated to module 2 (eth1/2/x) in different unit for physical redundancy.My question here is to which unit we ...

ys · 08-09-2020

I am planning to replace Cisco router to ICX switch with L3 license.Currently I am using QoS on Cisco as below. I want to implement same QoS on ICX.I tried to create config for ICX. Will this work and do similar behavior?Please advice how I can imple...

ys · 02-01-2019

I connected three 7450 switches with ROUTER image as below. Each switch has ve interface on same vlan as Management.I can ping from SW1 to both SW2/SW3 and vice versa. But I cannot ping from SW2 to SW3 and vice versa.How can I configure to communicat...

ys · 10-10-2022

Hi,It is;clock timezone gmt GMT+09

ys · 09-22-2022

Hi,You will need L3 premium license if you need functions below.https://support.ruckuswireless.com/articles/000006815

ys · 09-22-2022

You may use switch image.

ys · 09-12-2022

Thank you, @BenBeck.

ys · 07-11-2022

Thank you, Ben.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Target Path vs Recommended Firmware

UPLINK termination to the stack members and roles

QoS on ICX switch

Access within same vlan on ve by router image

Re: japan korea timezone setting

Re: RUCKUS ICX 7450-48F L3 configuration issues

Re: RUCKUS ICX 7450-48F L3 configuration issues

Re: Target Path vs Recommended Firmware

Re: UPLINK termination to the stack members and roles