Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....
Ruckus Smart Zone controllers can run a Zone with legacy firmwareExample: a 5.2.2 smart zone controller can support zones with the following firmware versions: SZ 3.6.2 (GD)SZ 5.1SZ 5.1.1SZ 5.1.2SZ 5.2SZ 5.2.1SZ 5.2.2We are following the N-2 rule fo...
Hello,I've noticed that MU-MIMO is disabled on the latest version of vSZ:MU-MIMO is disabled by default in release 6.1.1 on all 2x2 APs like R560, R550, R350, H550, H350 and T350 series.Why is it? Doesn't it add any benefit for multiple 1x1 clients? ...
I was wondering if there was "public" facing status page that can be configured for vSZ?A page that you will not need to be logged in to vSZ to get a status if something is down like a AP or switch.
I am wanting to send SNMP traps from the vSZ server to one of our monitor servers but I can not find where to enter the SNMP host information in the vSZ interface.Virtual SmartZoneEssentials6.1.0.0.935Help?
The logical interfaces of the Smart Zone are Management, Control, Cluster, and Data. Each can have its own IP address and MAC address. Management: Used to access the Web Interface of the controllerCan be used to SSH into the controller using admin cr...
