RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

OID SNMP vSZ to monitor AP Connected and AP Disconnected

Hello, I check the SNMP MIB doc with no luck.Is there a OID on a vSZ 3.4 to monitor Connected AP and AP Disconnected ?Thank you for your help.

vSZ-D Ruckus GRE tunnel

SSID is not broadcasted when "Tunnel WLAN traffic through Ruckus GRE" is selected. I don' t use NAT. In the AP ZONE the tunnel selected is one created with Ruckus Tunnel mode GRE. On the vSZ-D the # of Ruckus GRE Tunnel is zero.What is missing in ...

Announcement: SmartZone 3.4.2 (MR2) is Available on Support

Ruckus Engineering and QA have resolved a number of important bugs, incorporated intothe new SZ 3.4.2 (MR2) software release for SCG200, SZ-100, vSZ-E, vSZ-H controllers.Release Notes and MD5 checksum'd firmware images and MIBs can be downloaded from...

vSZ - Authentication setup - Cannot see non-proxy AD setting

I've just purchased the vSZ and installed it as vSZ-E. I'm in the process of setting it up and moving my settings over from my existing 1100 however i'm having an issue with the authentication.Here's what i've got..-- AAA servers - Non-Proxy AAA---- ...

How do we disable/enable a WLAN via SCG API?

We need to be able to switch between WLANs (one with captive portal the other open) during updates to our WIFI platform to avoid service interruptions to over a 100 different sites.Is there a way to do this via the API? So we can do this by batch.In ...

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

OID SNMP vSZ to monitor AP Connected and AP Disconnected

vSZ-D Ruckus GRE tunnel

Announcement: SmartZone 3.4.2 (MR2) is Available on Support

vSZ - Authentication setup - Cannot see non-proxy AD setting

How do we disable/enable a WLAN via SCG API?

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

Syslog and Palo Alto User-ID

Replacement switch not syncing up with SmartZone

REST API “Permission Denied” Error When Accessing ...

I believe I've lost the CLI enable password for my...

vSZ-H v6.1.2 Introducing H550 to environment

Migration from SZ100 (3.5.1.0.862) to vSZ-E – Best...

Regarding the hot spot (WISPr) authentication issu...

Configuring 3 SSIDs with 3 different VLANS and get...

A request for additional features.

What is Monitoring APs in Monitor dashboard?