vSZ - Authentication setup - Cannot see non-proxy AD setting

[tim_hobson]

I've just purchased the vSZ and installed it as vSZ-E. I'm in the process of setting it up and moving my settings over from my existing 1100 however i'm having an issue with the authentication.

Here's what i've got..
-- AAA servers - Non-Proxy AAA
---- Authentication Service - Active Directory

-- Hotspot (WISPr)
---- Staff Portal

-- WLANs
----- Staff-BYOD
------- Set as a Hotspot. Now here comes the problem, Hotspot portal - Authentication Server. Cannot see the Active Directory AAA server.

So i decided to create a Radius AAA Non-proxy authentication server and this shows.

Is this a known bug that ruckus know about?

Thanks

[jason_pearcy]

Create AD Profile under

Configuration>Services>Authentication

I had this same issue in the past

[tim_hobson]

I don't see Services under configuration so here's a few snips of what i see in vSZ 3.4.1

The Non-Proxy stuff:



No AD profiles in the WLAN settings



And i dont see what you mentioned Configuration > Services > Authentication

[jason_pearcy]

Are you a superadmin of this smartzone? Or tenant with access only to your zone?

[tim_hobson]

Super admin, its a fresh image downloaded from the ruckus downloads section. I only setup it up yesterday on hyper-v.