RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
On our existing 1100 Zonedirector we have multiple SSIDs. One for Staff, one for our Sixth Form students and one for Guests. We have it working great and trying to replicate the same settings over to the vSZ but not having much luck - i cannot find w...
I tried installing a single controller running 3.4.2 via .ova and the setup went smoothly until I got to the point where I tried connecting on port 8443. The controller is reachable via SSH and otherwise appears to be fine. I've noticed that I can'...
I'm about to deploy a vSZ-H in a DMZ between two firewalls, so that both APs from the internal network and from the Internet can connect to the vSZ. The network looks like this: Internal network(some Ruckus APs are here) | +---------+----...
Hi all, Can any one provide softgre tunnel config setup on both vSZ and WaG side. I am using cisco ASR1400 as WAG. Any FW ports to be opened? Any licence to test softgre only with 1 AP?
Greetings, Considerable platform work has gone into development of SmartZone 3.5 (GA), witha new UI/UX, architectural enhancements, significant performance and trouble- shooting improvements, SZ300, and feature content to significantly close gap ...
