RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
Hi.Some APs don't join to vSZ on 3.5.x.I captured packets between Ap and SZ.It shows "encrypt alert" same as below again and again.I have also tried it at another vSZ.It happens same.Anyone exprienced?Regards.
I found "snapshot disk" command in VSCG. How can I use this command" what is this command for?
Good day, I have a Virtual Controller (VSZ-H) in version 3.4.x with the configuration of 3 interfaces (Control, Management and Cluster) of course the three IPs are different. I have configured the hotspot (Wispr) and it works to me locally (Local BD...
What should you set your bandwidth limits and session time outs for customers using free wifi with a high volume of passenger/customer turn over?
Hi all,Recently we've implemented a public WiFi network which utilizes smart-meshing for a total of 4 out of 8 APs. Today we drove back to the site after all the installation work has been done last week. We noticed that a few APs don't seem to be br...
