Hi all,I currently have an icx7550-48zp running 10.0.20T243 software. I'm trying to setup a VLAN to pass through a specific port. I've configured the port untagged for VLAN 5 but in L2 settings. Is there anything I need to do in L3 settings to allow ...
Hello, we have 2 ICX7450 in stack. We have enabled OSPF process. I see LSA in ospf database, but there are no routes in Routing table. What can be issue? Version of software is SPR09010d. OSPF Neighbor is Cisco Router.
I had a sudden power outage, and after rebooting the switch is not supplying power on any configured ports. It is also failing to send data on one port.I reenabled POE on the ports. I've gathered some info, but nothing about it suggested something wr...
Hi All,I need to configure and deploy an ICX 7750-48 port switch as an Edge switch and uplink it to an Extreme 5420 switch core switch. Normally we use an ICX 6450 as an Edge layer 2 switch but these are now no longer in use and need to urgent conf...
Hi,I am configuring ACLs for IPv6, and it is not going as expected. There must be something I am missing as the logic, in my mind, is making sense but it is not working. I have VE 10 (Vlan 10) connected to ISP (internet), VE 20 (Vlan 20), VE 30 (Vlan...
