RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
I have several devices that are not able to get PoE from switches with model ICX7150-48ZP. However, when I connect these same devices to an ICX7550-24P They are able to draw power and work normally.These devices are B578 Edge Routers PN 201-104-P00-S...
We are adding an IP based PA system to our high school. The high school is made up of three buildings (separate vlans) that all connect back to a core router. The push-to-talk microphones (also IP) are in various offices at each HS building connectin...
We were seeing issues where it appeared that our ICX7450-48p units would have the POE modules fail at random in the field but on recovery would seem fine. After a lot of troubleshooting we found that certain model Dell Optiplex with Intel(R) Ethernet...
I've tried countless times to get my ICX-7450 past 08.0.80f without successChat GPT is trying to tell me my A0 ASIC is limiting things, the BCM56548_A0but googling doesn't confirm this I get kernel panics for all UFI images, and even non UFI past 08....
Reference: https://en.wikipedia.org/wiki/IEEE_802.1Q. The PCP field is also known as priority / class-of-service.This is happening on all tagged VLAN traffic, including ARP packets. I tried two switches: an ICX 6450 and an ICX 7250.Using `ip pcp-rema...
