CommScope RUCKUS Community Forums

VidiotsAGL · 09-04-2024

I'm testing out SPS09010j_cd3ufi.bin 09.0.10j on my ICX 7150 series switchesi noticed the following during boot:Backup is fine Kernel crashdump is disabled. starting console application cp: can't stat '/.pkg/libpam/etc/*': No such file or directory...

VidiotsAGL · 07-26-2024

show int eth 1/3/1Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name1/3/1 Up Forward Full 10G None Yes 2 0 xxxx.xxxx.xxxx uplinkshow run int eth 1/3/1interface ethernet 1/3/1port-name uplinkspanning-tree 802-1w admin-pt2pt-macshow run vlan (conde...

VidiotsAGL · 07-25-2024

I'm working on managing a ruckus network of 15 switches and trying to configure and optimize spanning tree.i'm cisco trained and understand how to do it well on that platform. finding the ruckus version to be kind of confusing.in the environment here...

VidiotsAGL · 04-23-2023

Hello all,I've inherited an organization with a bunch of ICX7150 switches, most if not all have POE.They're all on Version:08.0.80bT211 (SPS08080b.bin)Nearly all of my experience with networking is with Cisco and I'm familiar with upgrades and the ca...

VidiotsAGL · 09-06-2024

I don't believe it is affecting switch functionality, or i haven't noticed yet. I'm also a little new to this platform, so learning the nuances.I am just paying close attention to the booting process while trying out a 9.x train, migrating from 8.I s...

VidiotsAGL · 04-24-2023

understood.Thanks!

VidiotsAGL · 04-24-2023

thanks. I did a few tests on one switch at the edge of the network that was unused and it was pretty easy.I don't fully understand what's all happening with the different TFTP copies though.copy tftp system-manifest [IP] FI08095g_Manifest.txt primary...

CommScope RUCKUS Community Forums

User Statistics

User Activity

bug or missing config?

"trunk" port isn't a trunk?

understanding ruckus spanning tree configuration

Switch upgrades

Re: bug or missing config?

Re: Switch upgrades

Re: Switch upgrades