Hi,I have an ICX7250-48P (version SPR 8095m) that is exhibiting some strange behavior with RADIUS and I am unsure if it is my configuration or if this is how MAC Auth is expected to work on the ICX line. For reference, I have configured RADIUS before...
! Management VLAN configuration. SCH-ACCESS-101(config)# vlan 10 by portSCH-ACCESS-101(config-vlan-10)# untag ethernet 1/1/1 to 1/1/4SCH-ACCESS-101(config-vlan-10)# management-vlanSCH-ACCESS-101(config-vlan-10)# default-gateway 10.10.10.1 1SCH-ACCESS...
Hello,Can i convert data Ports (Ethernet 1/1/47) to be used for stacking in switch model ICX-7850Best regards
show int eth 1/3/1Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name1/3/1 Up Forward Full 10G None Yes 2 0 xxxx.xxxx.xxxx uplinkshow run int eth 1/3/1interface ethernet 1/3/1port-name uplinkspanning-tree 802-1w admin-pt2pt-macshow run vlan (conde...
Hello, we have 2 ICX7450 in stack. We have enabled OSPF process. I see LSA in ospf database, but there are no routes in Routing table. What can be issue? Version of software is SPR09010d. OSPF Neighbor is Cisco Router.
