Access Points - Indoor and Outdoor - Page 82 - Commscope

Access Points - Indoor and Outdoor

Forum Posts

Sorted by:

ASK the Pack

Indoor APs for campus/dormitory

Hi everyone, need your advice and experience sharing. Which indoor AP is best in campus/dormitory environment? With regards to price/coverage balance and can be controlled by vSZ?I read about R310/320 APs. Any experience with this model lately? Likes...

R700 R600 on a 12v battery

I have a situation that I wish to run R700 or R600 on a 12V battery supply. I am wondering what the voltage tolerance for these devices might be or is 12V regulated the only option, other than POe.One concern is the battery at full charge can be 16V,...

P300 setting

I am using P300 now. Ruckus recommends using the default setting if you don't use special reason. My question is that if the distance is within 1km for each device, which should I use a 3km setting following the recommendation or 1km?

Virtual SmartZone ap firmware update loop and cannot join my vSZ

how to fix this issue? R710 cannot connect https or ssh,so i can't login ap to set anything

We have a ZD 1000 with firmware version 9.3.4.0.21 and Few ZF 2741 running 8.2.0.0.53 what is the best method to upgrade the ZF 2741

We have a ZD 1000 with firmware version 9.3.4.0.21 and Few ZF 2741 running firmware version 8.2.0.0.53 what is the best method to upgrade the ZF 2741 to the same firmware, . would the zone director do it automatically?

Top Kudoed Authors

User

Count

2

2

1

1

1