We have a network of R720s running firmware 6.1.1.0.1274. At least for testing purposes, will the R750 work on this firmware, or is the 6.1.1.0.1322 required?
This summer I moved my school from R710s to R760s and my SZ100 to a vSZ. The move to the vSZ was painful enough since there is no migration process, but it seems that even with the R760s using the same settings that I had on the old SZ100 w/ R710s, t...
Can I use the 2nd port on one of my r510 APs to hardwire my PC via ethernet cable? The switch/modem is VERY far from my setup, I'd rather not run a huge cable through my whole home. I don't want to plug anything into the AP and potentially screw some...
Hello We have virtual SmartZone, version is 6.1.1.0.959 and I would like to apply per-user shape and not sure how I can do it. In setting I found one place where it should be:I tried to apply L3 Access Policy but it didn't shape traffic. How I can ap...
Hi All, Anyone with AX-capable access point experiencing frequent heartbeat loss and self-reboots?Checked cable are good, and PoE injectors are from Ruckus as well. From the logs, I was able to find related messages:Fatal error received from wcss sof...