RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

AP is always booting with the same firmware, can't change

Hello I need the help of the pack, there's any way to delete an image by cli or force to boot with the image2 ? I have an AP a 310d that have a problem, can't change de firmware, not by gui or cli i tried everything it's says it's a success, but afte...

H510 repeatedly reboots.

Hello everyone, I'm looking for a case of a "case".I was wondering if anyone knows of a similar case.I am currently managing a building with 4 H510s connected from one L3 switch.One of those H510s has one server connected to it from a LAN port.The LA...

FreshAir Sensor Connectivity on 2.4G keeps disconnecting

Hello Ruckus Support,We've been having issues with our FreshAir Sensor. These devices are connected to 2.4G only.We are using Ruckus Zone Director 1200 as the controller.Can someone help us check what is causing this issue? We keep rebooting APs even...

Resolved! Ruckus 510 keeps forgetting credentials

Good day I installed 2 Ruckus R510 at a client who is now 600km away and during the installation it failed to give me access to the Access Point after setting it up. I had to physically reset it. Now I, back at the office(not at the clients site) and...

Resolved! R610 stuck in Configure.Me mode

Hello. My issue appears to resemble this previous post, but there wasn't a practical solution.https://community.ruckuswireless.com/t5/Unleashed/R320-Unleashed-stuck-on-Configure-Me/m-p/52388#M4795I have a "new to me" R610 with Unleashed 200.13.6.1.3...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1