RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Having issues with R720's negotiating with Meraki 350X 2.5Gb ports.

This is a new issues, as ive never had a problem with a 2.5G linking up before. I would assume its likely from the Meraki side. I thought id run it past this community to see if anyone else is having issues, or have possible any thoughts on the issue...

A poor throughput performance standalone AP with NAT forwarding.

I have tested throughput test with NAT forwarding for Ruckus AP and some vender APs.On Nat-forwarding, Aruba(IAP mode)and Samsung AP(standalone mode) have over 300Mbps at throughput test, but Ruckus AP have just 150-200Mbps.Using same Ruckus AP, when...

Mesh APs not working after a Failover

Good day! Our topology consists of two Zone Director 1200 : One as a primary and the other one as a secondary. Ive configured the smart redundancy in both controllers, making the primary active and secondary as a standby. We have wired aps, that are...

vSZ-E with R510 - Maximum clients

Hello, based on KBA-4666 I would like to know if anyone knows the values for R510 which doesn't appear on the table. I have a Virtual SmartZone Essentials with R510 APs, is that table applicable on this scenario?

[960 License threshold exceeded][AP Capacity License] limit reached at [90%].

Im new to the Ruckus environment, i tried doing a search and nothing came up.The previous employee left this solution with 2 AP's setup. I'm trying to setup the rest of them with limited knowledge.Smartzone 100 using Zoneflex R610 AP'sDoes this have ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1