RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

After meshing 2 R710s, several clients can't access the internet

For the longest time, we had the two APs separate because the first of the two was set up prior to me working here. That AP started disconnected randomly so I decided to reset it (because I didn't have the credentials) and mesh the networks as I thou...

Ruckus IoT BLE module question about location tracking

Our company has deployed Ruckus r710's throughout the office. We also happen to develop a realtime situational awareness platform. We are looking to track BLE tags around the office. Does the IoT gateway or SPOT allow for this? I have asked Ruckus sa...

What is the best way to move aps from default grp to new grps in SZ300.

We have over 100's of ap's under Zone(ABC)- Grp1-Grp2-Defaultgrp. I have the mac address of the aps grp wise. Is there a way to move ap's based on mac address from default grp to say grp1. i dont want to select ap one by one in GUI. Any suggestion wi...

Wired Clients not listed in unleashed

I have a mesh network with two r510 unleashed. I have a client connected to the mesh node in the ethernet port (not POE). It seems to have connectivity and be working but it is not listed under the wired clients in unleashed in the clients section....

R300 not joining ZD3050

Greetings, people!As the title says, I'm having an issue connecting an R300 AP to our ZD3050. I've used the following methods in configuring Ruckus access points, and they've worked well with our R500 and R310 acquisitions (meaning they were able to ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1