RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Seeking information of how to best diagnosis this 3rd AP not having the speeds the other two have. AP also seems to restart often. We have checked the 100V feed for dropping or dirty power. All check great.
I am running an R510 Unleashed and trying to do Port Forwarding for a range but i cant seem to understand how its done.https://docs.ruckuswireless.com/unleashed/200.5/images/CreateNewPortForwardingRule.pngI need a range between 27014 to 27050.when I ...
Hi AllIt's not mentioned in the release notes, so I don't know if that's an oversight.. but is the R750 supported by the vRIoT Controller?For reference:vSZ: 5.1.2.0.302vRIoT: 1.5.0.1.21R750: 5.1.2.0.373Given that it's the flagship AP and is IoT ready...
Hi at alli have upgraded my vsz from 10 days, and from this date, my 2 WR710N with static ip and configured in client mode they work only for a matter of seconds, then they are dead.I can only restart them, and for few seconds they work well.I'm not ...
Hello, I have recently purchased an R710 on Ebay ( I have about 4 of these now and 2 T710's) I've had no issues in the past configuring my AP's but this one seems to be causing me quite a bit of trouble.I had to connect via ethernet and SSH into the ...
