CommScope RUCKUS Community Forums

R510 Unleashed Clients no getting IPs from DHCP

There is an r710 connected to the same switch and doesn't have the same problem. When I assign a static IP to the client there is still no network access. The only thing that works is enabling 'randomized MAC' on the client, that way it gets an IP fr...

Rogue DHCP Server Detected

My R610 Unleashed AP is detecting my DHCP Server as rougue on both VLANS. The R610 is the master AP (no other APs) and has a static IP address, APs DHCP server is not enabled. Beyond disabling rogue dhcp detection, is there any way to mark these addr...

Ruckus R500 with firmware 2.6.0.0.370 connect to VsZ with version 5.2.0.0.685

Dear All Master,we have problem with our AP Indoor, we have Ruckus R500 with firmware 2.6.0.0.370 connect to VsZ with version 5.2.0.0.685, in now cannot register to VsZ, anyone can help me to solve this problem.Regards,Fahrizal Z

Older APs with 64mb RAM - performance

Would like to upgrade Zonedirector 3000 to 9.8 to add newer AP models but still wan to support older APs, mostly 7762s. What does this mean: "Early models of Ruckus APs have 64mb RAM that may limit performance running 9.8+ firmware"?How/where is the ...

SSID is not visible during setup with the R510 latest firmware 200.8.10.3.243