Force clients to certain network/SID
How can I force wireless clients to a certain SSID within ZD1200?Using a ZD1200 with software version is 10.2.1.0 build 183 and 3 R610 devices
Forum Posts
Ruckus Smartzone Wireless LAN w/ AD authentication Issue
I have configured a WLAN in Smartzone with AD authentication. After connecting to the SSID and entering domain credentials in the WebAuth Portal. It fails with the following error "system is too busy"
AP for elevator solution with IP camera
Hi, I am looking for solution to purpose for elevator IP cctv solution.Initially I purpose using T310n located on top of the building pointing downwards to cover the elevator chamberThere are 2 elevator sharing with 1 chamber and having 27th floor in...
Clients won't reconnect after AP Firmware Upgrade...
Currently we are running AP Firmware 5.1.2.0.373 in our Default Zone, where 4 Zones are included and it works quite fine.When upgrading to a newer Firmware, last tried with 5.2.1.0.698 - three zones are working as usual, but in one zone clients wont...
Deriving RSSI from Neighbor SNR Values
My process for tuning larger deployments involves assessing how loud neighbouring APs hear each other at. Doing this with Ruckus is a little confusing for me due to the Neighbor report on each AP's page (in SZ 5.1.x) as only the SNR value is reporte...
