RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Is there a way to govern the speed of a VLAN?

I have a client who has about 10 VLANs. The overall internet connection speed is 1 gigabit. They'd like to give their employees full speed when available but they'd like to max some of the guest vlans to say 50mbit. Is this possible to have mi...

AP goes offline after connecting to the Ruckus controller.

Brand new ap (R720) running firmware 5.2.0.0.1412 with static ip address. I ssh to the ap and add the ip address to the controller and reboot. It connects to the controller and then goes offline. The ap is still pingable. I ran the command get s...

GVRP on T310C

We have connected a T310C to a HP-Switch. the HP-switch has GVRP enabled for Vlan's.Do we have to Tag the VLans Which we use in our Wlan on the port of the 310C or is the 310c able to understand GVRP?Kind regards,Laurens

R510 Network Slow Speeds averaging 30-50 Mbps

Hello,I have 3 R510's in my home. 1 for each floor, ceiling mounted and placed central to each floor. None of the clients on our network can ever achieve more than 50Mbps. My PC which is 15ft around a slight corner from the AP got 30 Mbps down a...

change boot image in R500

ok , im into the CLI of a ruckus R500it has 2 images inside :1. an unleashed 200.x2. a 100.xthe current startup image is set to image 2, connecting it to a zd1205, just continually gets firmware update loops.if I can kick it BACK to the 200.x unl...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1