RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

R610 flashed new version 114.0.0.0.1294 (now I am locked out of my indoor AP's ? )

I flashed my R610's to the newer version 114.0.0.0.1294. I cant login using Chrome via the IP address . I have also tried a few other browsers same issue. Nothing loads. When I go to my WI/FI setting I can see its config.me XXXX MAC but still cant co...

R720 Unleashed fast flashing CTL LED

I am running newest Unleashed firmware. Was trying to do a factory reset but lost power before procedure can complete. Now I can't access GUI via 192.168.0.1 and CTL flashes fast. Can this unit be recovered? Thanks.

What should my poe switch ourput be for a Ruckus R319

Hi,I have a neatgear poe+ switch and a Ruckus R310. All is working fine and I wanted to check what the power should be for this unit to ensure its getting full power and best performance.Currently the switch is showing 3.5 Watts66 mA53.1 Volts.I'd r...

standalone firmware update for 7982 AP? currently at 104.0.0.0.1347

Is this the most mature firmware for stand-alone operation? If not, where to find? I am holding "Standalone AP upgrade via CLI" article (#1551) which suggests using TFTP. The Download package from site today is 9.6.1.0.15BL7 and that sounds incomp...

R750 target fail detect

I'm getting frequent restarts for one of the R750 AP's with error: "target fail detect". Sometimes the AP is restarting with reason: application reboot. 6 clients connected. 802.3at PoE is fine. Firmware is: 200.8.10.3.243 Speedtest between master ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1