RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
I'm a network engineer currently working with demo Ruckus gear to evaluate it for our environment. We received two T310D APs for this trial, and I'm having problems with one of them. They are both connected to a PoE switch, and while the first one ...
I'm looking to remove per SSID rate limiting from the wlans managed by the Unleashed AP. I have tried the command for rate-limit perssid_uplink and perssid_downlink: config wlan <name> rate-limit perssid_uplink <rate> This works fine. I just can't f...
Hi! (I'm not sure about policy for reviving old threads, so instead of replying to this old thread, https://forums.ruckuswireless.com/conversations/ruckus-icx-switches/ruckus-unleashed-vlan-setup/5f91c3f3135b77e2478f6cb2, I'm starting a new. Feel fre...
Looking to get the OID for the WLAN service Need to be able to pull if it is disabled
I recently got my hands on a pair of R300 AP's. I have upgraded these with the software version Release 104.0.0.0.1347 (Solo AP) to configure them as solo AP's. I tried to configure a 2.4 GHz AP with WPA2 PSK AES encryption but my connection with th...
