I'm looking to remove per SSID rate limiting from the wlans managed by the Unleashed AP. I have tried the command for rate-limit perssid_uplink and perssid_downlink: config wlan <name> rate-limit perssid_uplink <rate> This works fine. I just can't f...
Hi! (I'm not sure about policy for reviving old threads, so instead of replying to this old thread, https://forums.ruckuswireless.com/conversations/ruckus-icx-switches/ruckus-unleashed-vlan-setup/5f91c3f3135b77e2478f6cb2, I'm starting a new. Feel fre...
Looking to get the OID for the WLAN service Need to be able to pull if it is disabled
I recently got my hands on a pair of R300 AP's. I have upgraded these with the software version Release 104.0.0.0.1347 (Solo AP) to configure them as solo AP's. I tried to configure a 2.4 GHz AP with WPA2 PSK AES encryption but my connection with th...
I've now experienced this twice, and are currently struggling:Existing Unleashed Network consisting of 3 R550 APs.Brand new R550 AP. I've connected it to the network, status is UNKNOWN. App shows the AP is running an older firmware.Expectation: New A...
