CommScope RUCKUS Community Forums

The ethernet interface configuration on our Ruckus r610 keeps resetting.

We have a Ruckus r610 with the latest unleashed firmware.  After SSHing into it, I used command:set interface eth0 type general untag none vlans 1,3VLAN 1 is for access and VLAN 3 is our guest network.  This setup works for around 2 weeks, then out o...

Random AP R510 reboots - [application reboot]

Ruckus R510 AP reboots randomly.I have 6 AP's in the network and only this one reboots. I have checked the switch that it is connected to and there are no problems with connectivity. There are also 2 PoE cameras connected to it and they do not drop a...

P300 backhaul bridging topology

Hi everyone, need your advice and experience sharing. P300 (P-to-P/P-Multi-P bridges) can support Mesh topology in outdoor backhauling Network !? RAP->MAP->eMAP->MAP !? also, can be use-it for wireless end users ?Regards,

Can I add R610s to my R500 unleashed network?

FW upgrade issue

I have 30 H510 APs having unknown FW version and not registering in SmartZone. I have the correct FW downloaded but APs are not allowing access through web portal, TFTP or SSH. Please help me on FW upgrade.