RUCKUS Indoor and Outdoor Access Points (APs)

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Resolved! Is there a way to verify how much wattage an AP is receiving?

I have an R550 with the current firmware on it. It has an orange Icon in the corner of the unit about the wifi 6 indicator. When I click onit I get - "Not enough electricity is provided to this AP, it's capabilities are degraded. Please refer t...

can I user Zone flex r500 AP with zone director 1000?

Hi I have my zone director 1200 broken(faulty) so I want to use my r500 AP with zone director 1000? Are they compatible and if yes Is it difficult to install them on the new zone director 1000? Thanks

All APs on our campus showing Disconnected on the ZD and there is now WIFI

Hello All, We lost all of the APs on our school campus and there is no wifi, all the APs' LEDs behave the same, PWR and CTL/DIR LEDs are blinking green slowly. APs are not reachable via ping, and on the ZoneDirector they are all showing Disconnec...

H500 disconnects from (remote) ZoneDirector

Hi all! We have a few sites that we moved from our vSZ to a Zonedirector (due to ap's not being supported on newer vSZ version). Zonedirector is running 10.1.2.0 build 318, newest one supporting the ap's in question, a mix of R300/R700/H500. E...

Any reason why on my vSZ-H controller my T750 PoE failed to enable on eth0? Even in CLI I cannot enable PoE OUT

I've tried with the controller and it fails the update to enable PoE on eth0 (interface 1) PoE out interface. Controller successfully updates other settings on same T750. Have tried on 2 brand new T750 APs. I also tried via the CLI and is still faile...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1