Not in user guide. How does one set a community or see the default SNMP community in T310C and T310D in standalone mode? FW is 114.0.0.0.1360 Many thanks, Jeff
I have an R510 with firmware 114.0.0.0.1360 connected to our VSz controller (VMWare) The VSz and all the other APs are version 5.1.2.0.373. The new AP says 'Online' and has and IP address in the range of the others but has no traffic and channels are...
i am unable to Flash the old ZF7982s that ive replaced in my network back to the standalone firmware they are currently on
3.6.1.0.354 and i want to use them as standalone elsewhere ive tried to put these firmwares on zf7982_9.7.1.0.17.BL7 and zf7982...
Hi. I’m new to Ruckus and don’t know to much. I have 3 R550’s running Unleashed in a 3500sq foot home. I setup Unleashed as Mesh, not sure if that was a mistake. All 3 R550’s are hardwired to the router. About 1/3 of my devices show a poor signa...
I have an r710 (software: 100.2.0.0.336) that sat for 2 years before I found it. The site has 18 existing r710s and is licensed for 20. When connecting to the ZD1200 controller (software: 10.2.1.0 build 159), the new AP reboots constantly, leavin...
