Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site https://un...
Hi! i use only 2 AP in my home in Unleashed mode with last firmware - R710 and H510. Both wired to Netgear OClick power switch. r710 pared with short 1m cable. h510 cable is in wall ~5-10 meters. Once a week i have random reboot. My question is - ho...
Hello, I am having trouble to setup an access point that I have here. The AP is the Ruckus T310c. I have made an reset to factory setting by clicking for more than 4 seconds in the button right next the ethernet port. I had configured the PC ip ad...
I want to setup my R720 to standalone AP but the config menu is disbaled, but this AP was previously used with zone director. Hope you can help me with this. Please see the attached screenshot below.
Hello, short question: Is it possible to combine the R320 and R610 Unleashed AP in one site? Wich one must be the master ap? I plan to to build a wlan for an small company. There is an office that has no network cables. When i can install two R610 ...
