Ruckus R500 status cannot connect to the ZD1100
10 AP Ruckus R500 status cannot connect to the 12-license ZD1100 troller although Upgrading firmware has run for 2 days and the status is repeating.Anyone here please help me to solve it, thanks!
Forum Posts
Red Power LED after Upgrading 7055 Firmware
I recently update the firmware in a Ruckus 7055 AP to ver 104.0.0.0.1347. Ever since, the power LED in the Access Point is solid Red after the AP has booted up. With the old firmware, the Power LED was green after boot up. Otherwise the AP seems t...
R750's 2.5G ethernet port not working
The 2.5G POE port is plugged on Zyxel XS1930-12HP switch. The switch supports 1G/2.5G/5G/10G, and POE++. The problem is that it is unable to negotiate with the switch at 2.5G speed. I already tried to set the switch port to auto-negotiation or force ...
Joanne
My 510 is stuck in an upgrade loop ..I have 3 access points on my setup and 1 is brand new. however the company I bought them from is not answering any calls and one of my boxes can’t join the network even though it’s showing as being there. please c...
outdoor 610
hi everyone, i have outdoorT610, was working fine so when I left company for some days off, the operations team have accident when them trying cut the tree...the tree dropped to device T610, device is looking fine. so there problem with t AP is worki...
