RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Can you use the R510 as a switch?

Hello, I see the unit has 2 network ports. I know that if I connect the POE network cable to it, it is able to get DHCP and work as an AP. We have one mounted in a hard to wire room and if we could connect a network cable to the second port and ...

Update zf7321 standalone, root certificate from Nov 2016

Hello, Anyoone know if I can update the root certificate on standalone zf7321 as "certificate verificaton status" shows PASSED so I cant access the CSR part for the cert replacement process. Don't even understand why it show PASSED in the first plac...

ZD 1200 Guest network connection

Hi there, We have a ZD 1200 with a number of AP's currently this is configured just for our internal corporate network, this is working well. in the past we have separate AP's for our guest network that connected to a separate port on our firewall so...

My Lennear Home R510 keeps dropping off client

So I have three R510 hot spots in my house. Two are right below each other...i.e. the one is on a 1st floor and the second is on the 2nd floor. The 3rd one is in the bathroom few rooms away. Now when I am near the bathroom one (so master bedroom, ...

Mesh mode ZD1012 and ZF7363

Hi. I have a network with wich consists of 25 APs ZF7363 and controlled by ZD1012. The network is maxed out with APs, but i still have some dead spots and was wondering if i could use mesh mode. My qustions is: - If i enable Mesh in the ZD1012 will ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1