RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ruckus Smartzone Wireless LAN w/ AD authentication Issue

I have configured a WLAN in Smartzone with AD authentication. After connecting to the SSID and entering domain credentials in the WebAuth Portal. It fails with the following error "system is too busy"

AP for elevator solution with IP camera

Hi, I am looking for solution to purpose for elevator IP cctv solution.Initially I purpose using T310n located on top of the building pointing downwards to cover the elevator chamberThere are 2 elevator sharing with 1 chamber and having 27th floor in...

Clients won't reconnect after AP Firmware Upgrade...

Currently we are running AP Firmware 5.1.2.0.373 in our Default Zone, where 4 Zones are included and it works quite fine.When upgrading to a newer Firmware, last tried with 5.2.1.0.698 - three zones are working as usual, but in one zone clients wont...

Deriving RSSI from Neighbor SNR Values

My process for tuning larger deployments involves assessing how loud neighbouring APs hear each other at. Doing this with Ruckus is a little confusing for me due to the Neighbor report on each AP's page (in SZ 5.1.x) as only the SNR value is reporte...

R730 negotiating 100M no matter what I do

I've got a brand new batch of about 20 R730 APs. They're all connected to Cisco 2960X PoE+ Switchgear. I don't know if I have a power issue or LLDP issue. but all of them running any version of the firmware with or without a controller etc. They all ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

2

1

1