RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Bonjour gateway on AP: enable on all AP's, or just on a few?

We're using Bonjour Gateway on AP (not on the ZoneDirector). That works fine: Apple TV's are published to the clients VLAN and they can reach them.Question: is it necessary/recommended to enable the Bonjour Gateway configuration on all AP's, or just ...

R710 in Configure.Me-XXXXXX mode

I have an R710 in Configure.Me-XXXXXX mode. It was connected to a SmartZone 100 controller and has since been removed from the controller.I can connect to it with the Configure.Me SSID and the S/N of the unit. The IP of the unit is 10.154.231.125 a...

Constant Power Cycle after upgrade to 200.9.10.4.202

Ruckus R610 unleashed upgraded to latest firmware (200.9.10.4.202) yesterday, keeps power cycling constantly with no pattern.I get the same message every time. No other reasons.These are the messages on logs:2020/10/01 16:38:51HighAP[RAP@XXXXX] warm...

Access Points - help me make a decision.

Need some help in decision making. This is for my house, 3k sqft, single level, ~40 wifi clientsI am split between 1. Two used R610 unleashed in mesh($300) from ebay - used, but enterprise class2. Two TP Link EAP245 ($200)- cheapest, but still good.3...

7363's on a vSZ-H;

Quick query- what is the latest version of vSZ-H firmware that people are successfully running a legacy AP firmware zone that supports 7363's (and which AP firmware version are they using)?Secondary to the above, do you have to reflash the 7363's ind...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1