RUCKUS Wireless Questions and Best Practices

|

Wireless Questions and Best Practices

RUCKUS offers a number of Best Practice Guides for all aspects of Wi-Fi system design, installation, configuration, management and maintenance.

Forum Posts

Sorted by:

ASK the Pack

2.4 GHz channels and power settings

Can I just get some clarification on best practices for the Ruckus APs.I've been told to not use the 1,6,11 channel pattern and have all the 2.4GHz channels (1-11) enabled as this helps with beamflex; is this true as it goes against everything I have...

USING MIB TO MONITOR AP STATE

Hello,I need to see the state (Up /down) of my Ap's on EON (Eyes of network). I use the Virtual SmartZone - Essentials (vSCG-E01).Can you tell me how to do? with the command snmwalk ? OID?Than you in advance

Limit dB signal for access

Hello,We have a ZD1106 controller and some r600 zoneflex. I would like to know if it is possible to configure a limit on the signal power in the access of the users?For example. If a user is too far from the AP with a -70 dBm signal he will not be ab...

Whatsapp Voice Notes over VLAN not working

In this new deployment we have a very simple setup. Two SSID with VLANs, one internal and one public.The internal SSID VLAN has a properly configured firewall with its own internet connection, this VLAN is VLAN 1 and is untagged, so far; this will ch...

Announcement: ZoneFlex P300 100.1.0.9.57 GA Refresh3 posted to Support

Greetings, Ruckus DevEng and QA have released a new (GA Refresh3) firmware for our P300 PtMtP 802.11ac wireless bridges. We’ve posted the new P300 PtMtP bridge Release Notess and firmware, and here are the links you can use to access the new code. ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1