RUCKUS Wireless Questions and Best Practices

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Wireless Questions and Best Practices

RUCKUS offers a number of Best Practice Guides for all aspects of Wi-Fi system design, installation, configuration, management and maintenance.

Forum Posts

Sorted by:

ASK the Pack

No mesh, no WDS, no repeater mode ZF7363

ZF7363 EOL device I understand that but it can't mesh on standalone, can't be a repeater, I have a Chinese £11 Can which has repeater mode and the signal is as good as ZF7363. I thought I will give Ruckus a try even thought it is an old device I woul...

AC+ not working with older devices - any other kind of secondary protocol I can add?

I'm part of an organization that uses Ruckus for our Wifi services. I do not know any of the exact specifics, because I am not part of the hardware team on our organization.We are using an AC+ protocol, and some of our older devices do not work corre...

Client Isolation Whitelist Chromecast with R500

Hello. I walked into a situation that has 4 Ruckus R500 access points. There are 2 SSID's being broadcast, both on VLAN1. One is a private network that has no restrictions other than WPA2 password, the other one has the additional 2 checkboxes set to...

R500 WiFi speed (2.4 and 5) seems limited to 100mbps despite FIOS Gigabit

Have read many posts and am convinced I have some type of configuration issue. All of my new devices (e.g., iPhone XS, Surface Pro 6) seem to top out at 100/100mbps. I don't use mesh, have 3 R500s and a ZD 1200 connected to Verizon FIOS Gigabit int...

Connect AP ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables conected to the network)

Connect APs ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables connected to the network) - I`m planning to use Mesh but I don`t wanna make pre setups using network cables. note: I`m not using unleash

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1