I have a R310 running the wireless in the house. It's connected to a switch via ethernet - about 2m long. Also connected to that switch is a 7363 - I'm using the PoE port. The cable is about 20m long.I'm doing something wrong, but I don't know what. ...
Hello friends, I have an AP with a "not UNLEASHED" firmware version, i change the ip parameters, then upload a firmware version, and change the ip to 192.168.0.1, the CLI command "set ipaddr wlan vlan " does not work with this version, how i can chan...
Hi All,I set up an Unleashed AP as master some days ago, and the iOS App keeps getting notifications from the backend 1-2 times a day regarding 'External gateway status changed from [reachable] to [unreachable]. and visa versa.The issue is, the Down ...
If we set up a captive portal on our master unleashed AP and allow traffic on firewall according to master AP's IP address, what will happen if master AP goes out and another AP takes over its roll? Do we have to allow traffic on the firewall for all...
Hi everyoneI've been trying to update our Unleashed Network for the last couple of days.We are currently running on Version 200.4.9.13.47 (all AP's)Our Unleashed contains 15 x R500 AP's.Under "System & Admin" > "Administer" > "Upgrade", i can see a l...
