Reboot ALL access points simultaneously - Unleashed 200.18.7.1.323

[bdillard]

Hello,

I don't have an old firmware AP to test with but it seems like under maintenance there was an option to reboot an entire unleashed group - I can't seem to find that any more.  To be clear, I don't want to reboot one at a time - thanks!

[Mayank]

Hi bdillard,

Thank you for posting your query !!!

Unleashed (200.18.x) does not provide a one-click “reboot all APs” button in the master GUI

Please refer the below link for your reference.

https://docs.commscope.com/bundle/unleashed-200.18-onlinehelp/page/GUID-2292768B-3EF8-4060-8B4C-7211...

Thanks

Mayank

[bdillard]

Sorry - i meant to ask is it possible to reboot all of them simultaneously.

[ms264556]

I haven't tried on the latest releases of Unleashed, but this was possible from the CLI last time I tried... 

ruckus> enable
ruckus# debug
ruckus(debug)# remote_ap_cli -A "reboot"

[Mayank · Accepted solution]

Hi Bdillard,

I have tested in my lab in CLI, I can  reboot a couple of  APs using the below command: 

ruckus> enable
ruckus# debug
You have all rights in this mode.
ruckus(debug)# remote_ap_cli -A "reboot"

Unleashed (200.18.x) does not provide a one-click “reboot all APs” button in the master GUI

Thanks

Mayank