CommScope RUCKUS Community Forums

Richard_NZ · 11-20-2024

I have a R710 and a R650 connected to a TP-Link PoE switch SG1016PE.The Unleashed gui tells me that ‘not enough electricity power’. It was all good before a power outage and now I get that plus the wireless speed in the house had dropped dramatically...

Richard_NZ · 08-09-2024

I'm seeking help on whether to tick the mesh box or not. A newbie, I have moved into a house that needs the wireless extending across the house. I have a r710 and a r650. I have them up and working. The router wireless is turned off and the two Rucku...

Richard_NZ · 12-27-2020

I wanted to increase the wireless capability to the back of the house. At the front I have a r310. But, 20m away and through the house the connection dwindles. So, I ran a 10m ethernet cable to a ZF 7363. It works. However, there are issues I don’t k...

Richard_NZ · 03-07-2018

I have a R310 and I'm looking for a way, in the software, to disconnect / pause / turn off the wireless. Is there a way as I can't see one and I've been unplugging the thing to get the resolve I want. Is there an easier way?

Richard_NZ · 02-16-2018

I have a R310 running the wireless in the house. It's connected to a switch via ethernet - about 2m long. Also connected to that switch is a 7363 - I'm using the PoE port. The cable is about 20m long.I'm doing something wrong, but I don't know what. ...

Richard_NZ · 11-20-2024

I have read I have to switch from auto to 802.3at but I have no clue how and where to try that?Ok - I found a way to do that by following the above advice. Thank you. Now the orange warning triangles have gone. I still have issues and I'll post these...

Richard_NZ · 08-16-2024

Thanks for the reply. I now have short ethernet cables connected to each AP via a PoE switch. So, I'm wired.question - is it possible to configure the AP's so that a wireless device switches between one or the other according the the strongest connec...

Richard_NZ · 12-28-2020

would not go in last post Note: This comment was created from a merged conversation originally titled here is the diagram

Richard_NZ · 03-09-2018

Perfect - that's what i was looking for.Thank you.

Richard_NZ · 03-08-2018

Thanks for that. I think there's some confusion here since my interface is different from the above and that's probably why I'm not seeing radio anywhere.Having said that, Services does have this but there is still no option to turn on/off.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Another - not enough electricity power’ question

Mesh or not

home extending

Turn off Wireless

How do I do this

Re: Another - not enough electricity power’ question

Re: Mesh or not

Re: home extending

Re: Turn off Wireless

Re: Turn off Wireless