RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

[VSZ-E] [CLI] How to get the value of a zone/wlan setting via the CLI

Suppose I want to get the roam-factor value of a WLAN in a zone. I would like to query this value but I can't find a way to do it. The get or show commands doesn't exist when I'm in config...

vSZ-E 5.1 with old Android cant get the LOGIN-Page on Hotspot (WISPr)

I do use vSZ-E 5.1 with Hotspot (WISPr). I do have problems, to let old android devices to get connectet. They doent get the typical "Questenmark-Symbol" an the jump to the Login-Page!Here I do need to connect the WLAN by hand, but then I do need to...

Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?

Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)? Solution that AP Zone remains on an older version that supports these models is not perfect for us.We use vSZ-H (3.6.1..)

M510 and Zone configuration (SmartZone)

If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).The move is only possible if every SSID is configured with tunnel or dhcp/n...

T310C Rejected by SZ100 ACL

Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. Below is the error im seeing on the event logs.model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.I have tried the below with...

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

[VSZ-E] [CLI] How to get the value of a zone/wlan setting via the CLI

vSZ-E 5.1 with old Android cant get the LOGIN-Page on Hotspot (WISPr)

Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?

M510 and Zone configuration (SmartZone)

T310C Rejected by SZ100 ACL

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

REST API “Permission Denied” Error When Accessing ...

I believe I've lost the CLI enable password for my...

vSZ-H v6.1.2 Introducing H550 to environment

Migration from SZ100 (3.5.1.0.862) to vSZ-E – Best...

Regarding the hot spot (WISPr) authentication issu...

Configuring 3 SSIDs with 3 different VLANS and get...

A request for additional features.

What is Monitoring APs in Monitor dashboard?

Consultation on Smartzone hardware issues

Is it a firmware version issue