RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

vSZ-H "Authentication server not reachable" alarm with unusual IP

Since upgrading to 5.1.2.0.302 we have been getting several oddities, one of which is two alarms:Authentication Server [172.23.0.110] not reachable from Radius Proxy [172.23.0.185] on Virtual SmartZone [128.149.95.207]Authentication Server [172.23.0....

Is there a way to insert a new vSZ ACL policy without using the up arrows?

We've got roughly 50 policies in place on nine domains/zones & occasionally need to add more. Adding a new user traffic access control rule creates a new rule as the last item. Using the GUI to click on the new rule and moving it up past blocks etc. ...

How to change old sz ip to new sz ip on AP side.

Hi.If you need to change old sz ip to new sz ip on AP side for migration or test...Don't type only this command as "set scg ip".If you did type like above, AP don't move to new sz ip.Only apply the ip on "Server List:"You have to type two command.Fir...

Important: Do NOT upgrade to SmartZone 5.2.0.0.685 if you have not.

Hello, A previously unseen issue with APs not being responsive following a reboot after being upgraded to SmartZone 5.2.0.0.685 has led to our pulling the firmware downloads from the Support portal for now. We will resolve the issue, and re-p...

DHCP Best practice recommendation

Greetings,We are working on some deployments where there will be multiple non-connected gateways within a venue space and WiFi users will be roaming between them. We use a vSZ for the controller. The easy, but probably not the best way to deploy th...

CommScope RUCKUS Community Forums

Forum Posts

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

vSZ-H "Authentication server not reachable" alarm with unusual IP

Is there a way to insert a new vSZ ACL policy without using the up arrows?

How to change old sz ip to new sz ip on AP side.

Important: Do NOT upgrade to SmartZone 5.2.0.0.685 if you have not.

DHCP Best practice recommendation

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

System Operation

DHCP server on smartzone for wireless clients

SZ124 WLC Newest possible Firmeware Version for th...

I can't try to auth using chap for Test AAA server...

VSZ - Essential 3.6.1.0.227

SmartZone AP Issue

Remote syslog server

MFA Workflow

SZ100 Can not upgrade from 3.6.2.0.222 to 5.2

SZ 100 upgrade from 3.5.1.0.862