Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....
A couple of our sites are having problems since moving over from Smartzone Controller 5.2.2.0.317 to 6.1.2.0.354. Wifi is very poor and cutting out on several floors.To resolve this problem we have had to rollback the AP firmware on the problem sites...
Hi,We are using VSZ - Essential 3.6.1.0.227 and about a week ago it is no longer showing the correct details of the access points, mesh role of external APs T310D is showing as Disabled instead of RAP for hardwired and MAP for meshed APs, although th...
Hi Support,We are using the Hotspot (WISPr) authentication type with Active Directory service protocol for the SSID, when a user connect to the Wi-Fi, it takes more than 15 seconds before the authentication screen pops up, the problem occurs on diff...
Hello,We have very old virtual SmartZone, version is - 3.4.0.0.976. It work's good, but we purchased several old Ruckus AP (R310). I Would like to add it to this SmartZone (I have free license's), but I can't. I need to approve this AP, but I can't c...
Hi All, I am trying to install SSL certificates generated from zerossl.com. But during the installation in says that the server certificate and private key are not matching. During validation it was success.Please help here
