RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

Show dot1x configuration command missing from cli

i am trying to configure 802.1x for our ruckus switches which are manged in ruckus one.i used the cli to add the radius server, enable dot1x etc.but when i try to show the dot1x configuration i get:SSH@wsw02_Serverraum(config-authen)#show dot1x conf...

Resolved! Can't assign management vlan?

Hello,I recently acquired an ICX 7250 and am attempting to setup the management vlan but it seems the command isn't available? Here are the steps I took:Updated to the latest router version (9.0.10h_cd2)Did a factory resetCreated VLANAssigned vlan i...

ICX 7450-24 unable to use both 40g ports as uplink ports

I have ICX 7450-24 updated to 09.0.10hT211 and I am unable to use both 40g ports at the same time to connect to two different TrueNAS servers. It does not matter which cable I use on which 40g port I use. First cable plugged in wins and that server...

ICX6610-24P-E - Disable Jumbo Frame on Interface

Just purchased as an upgrade for my home lab a pair of ICX6610-24P-E so I can get my four Esxi HCI nodes and NAS on dual 10Gb.ver 08.0.30uT7f3 Cool.. all working. But... VMWare vSAN / Nutanix require jumbo frames. But I have an ongoing issue wit...

ICX MAC auth for Dynamic VLAN without RADIUS

I saw this article and it appears the commands are in version 10, but they're not found. mac-auth auth-filter is an interface command in the documentation, but there's no documented way to create MAC filters, only ACLs. When you try to enter eithe...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1